Last year we made a DDS in the "Concept" program, this provides us with an Arduino shield for frequency synthesis from 100kHz to 250MHz, SDR IQ outputs and a real time clock.
New BASIC project
The list of possible boards in the project is:
1. VFO - A 40m Basic VFO along the lines of that needed by the Amateur Radio Intermediate course. Introducing a Colpitts serial tuned oscillator with vari-cap tuning and an output buffer stage.
Eagle files can be downloaded here Schematic, Board.
2. DCRX - A 40m Basic Direct Conversion Receiver for CW and SSB, based on the world's simplest circuit using the SA612 mixer and LM386 audio amplifier.
Eagle files can be downloaded here Schematic, Board
Combined together the VFO and DCRX it makes a simple receiver for 40m, with manual or Arduino software tuning.
Here are the input filter LTSpice simulations:
Combined with the DDS frequency synthesiser board of the previous CONCEPT project, instead of using the VFO, the receiver can be tuned to an accurate frequency in the 7MHz band.
Here is the DDS & DCRX in operation, with WSPR signals being received on 40m, with the RX output fed to a Startech ADC running at 16bit/44.1kHz and fed to the WSPR program running on my iMac.
3. Future projects which are just ideas today and would be developed by members include:
- RFMETER - An RF measurement meter, measuring -80 to +10dBm. Update see later posting for completed design.
- BRIDGE - An Antenna Analyser, basically a 50 ohm bridge that shows the antenna impedance and SWR. RF input from the VFO or DDS
- QRP_RIG - a complete SDR based QRP TX RX
- WSPR PA - a 2W PA for 40, 30, 20m for a WSPR beacon.
- BPF - a switchable 40, 30 20m BPF board that can be used with the RFMETER and QRP_RIG
... and as many other ideas that members have. As an aside have a look at this web site by PY2OHH for a combine measurement system, similar to a combination of our boards stacked on our Arduino UNO. Could give some inspiration.
No comments:
Post a Comment